Venetian plaster might be one of the best choices for you when you’re thinking about redoing your wall. It’ll give you the most ancient feeling and make your walls pop up beautifully when someone enters your house.
However, if you already have a Venetian plaster on your interior, you might even think about painting over Venetian plaster any time soon. Because little changes might turn out to be beautiful often.
So, if you’re interested to learn how to change the color of Venetian plaster, we’ve got your back. Today we will help you to know more about your Venetian plaster. Also, you’re going to learn how you can paint over that Venetian plaster too.
Now, without further delay, let’s get started-
- 1 What’s the Venetial Plaster?
- 2 Painting Over Venetian Plaster- How to Do It?
- 2.1 Step 1: Skim Coat Over Venetian Plaster
- 2.2 Step 2: Clean the Surface
- 2.3 Step 3: Sand with the 80-Grit Sandpaper
- 2.4 Step 4: Sand with the 120-Grit Sandpaper
- 2.5 Step 5: Use the Painter’s Tape
- 2.6 Step 6: Use Primer for Venetian Plaster
- 2.7 Step 7: Apply the Paint
- 2.8 Step 8: Remove the Painter’s Tape
- 2.9 Step 9: Another Coat
- 3 Conclusion
What’s the Venetial Plaster?
Before we start with anything else, you must know what your Behr Venetian plaster or Venetian plaster exactly is.
Well, it refers to putty made from fired limestone combined with water. Then, it’s mixed together to make lime plaster or as you know the Venetial plaster.
However, when you apply that plaster to walls and keep it exposed, the carbon dioxide in the air helps the mixture turn back into limestone.
Seems magical right? Well, it’s just a simple magic of chemistry. Interestingly, this is the same stuff that your ancestors used in ancient Greece and Egypt.
And do you know the best thing about the Venetial plaster? You see, even though it has been here for a long time, it’s not out of your trend.
So, is venetian plaster out of style? The answer is no. It’s still in your service for you. Moreover, it has endured the test of time, both physically and aesthetically for you.
The look of the Venetian plaster is earthy and soft both. You’ll notice that the thin translucent layers create an iridescent finish. Basically, that gives it the appearance of depth and movement. That is what makes the Venetian plaster stand out in the market.
However, as there are no aggregates mixed in it, it also makes it stand out from the other plasters too.
For example, Tadelakt and Marmorino have aggregates like marble, granite, or glass. You see, they might seem similar to the Venetian but to be real they are not. Because they have the aggregates that add a thickness and an underlying subtle texture to the overall appearance.
Painting Over Venetian Plaster- How to Do It?
You see, painting over polished plaster can take some work. It also doesn’t matter if it is the Venetian plasters or not.
Before you’re getting started here are the things that you’ll need in the process-
- Mineral Spirits
- A Cup
- Clean Towels
- 80 Grit Sandpaper
- 120 Grit Sandpaper
- Palm Sander
- Paint Brush
- Paint Sprayer
- Paint Tray
- Painter’s Tape
So, how are you going to paint over the Venetian plaster?
For that, we’ve arranged some steps that’ll help you through your journey of painting on the plaster-
Step 1: Skim Coat Over Venetian Plaster
Dust and grease might be a normal thing on your wall if you live in a country where the humidity is high. However, you can’t just put a layer on your previous Venetian plaster.
You need to observe the plaster first. You should for any damage on the plaster first. With time, the plaster might often get damaged in some sections.
So, skim coat over Venetian plaster wherever you see a defect that might cause you trouble in the future. Make sure to seal every little holes too. Then, let the skim coat set for some time.
Step 2: Clean the Surface
Now, you’ll need to grab your mineral spirit and splash about ¼ cup of mineral spirits on a clean, lint-free cloth. Then, you need to rub the dampened cloth against the wall.
You need to let the spot dry now. Also, remember to check to see if any wax or layer or dust has been removed from the surface.
If the surface is clean, you’ll be good to go to the next step.
Step 3: Sand with the 80-Grit Sandpaper
It’s time to start some sanding on your surface. So, you’ll need to attach 80-grit sandpaper to your palm sander and get into action.
Go over the walls lightly if the mineral spirits didn’t remove that much of the stains. After you’re done, wipe away the dust with a damp cloth.
Step 4: Sand with the 120-Grit Sandpaper
After you’re done with the 80-grit sandpaper, change the sandpaper to the 120-grit sandpaper. Now go over the whole surface again.
This helps you to make the surface smoother and more ready for your painting.
Step 5: Use the Painter’s Tape
There are often electrical outlets or switch plates if you’re doing it on the wall. You need to take care of those outlets and switch plates too.
So, what you can do is that you can put painter’s tape over any trim, electrical outlets, or switch plates that you do not want to get the paint on. You want to change the color of the wall, not the outlets.
Also, put drop cloths on the floor to not make a mess.
Step 6: Use Primer for Venetian Plaster
It’s time to use one of the most essential things of all time for painting. The primer.
You need to pour just a few inches of alkyd or quartz primer into the paint tray. Then, you need to use the edging brush to work around your painter’s tape. You’ll need to use a long-handled roller to do the rest of the walls.
Also, remember to apply a good quality primer in a thin and even coat. Moreover, you should let it dry according to the manufacturer’s directions.
Step 7: Apply the Paint
Grab the paint tray and the paint that you’re planning to apply. Now, you need to fill the paint tray with about halfway with latex paint.
You can use a clean edging brush to work around the painter’s tape on the trim. And to paint the rest of the walls, use a clean and long-handled roller.
After you’re done applying the latex paint, let it set and dry according to the manufacturer’s recommendation.
However, you can use HVLP paint sprayers if you have the chance to use it. Because they’ll give you the best outcome. It will spread the paint smoothly on the surface using low pressure.
Step 8: Remove the Painter’s Tape
Now you can remove the painter’s tape while the paint is still damp. Because if you remove the painter’s tape after the paint is dried, that might cause pulling up dried paint too.
However, if you need small details to be fixed, you can use a small brush to do so. Just make sure that you don’t make anything else worse.
Step 9: Another Coat
If you feel like that you need another coat of paint to add, you can do that after the first coat of the paint is dried properly.
In most of the cases, the primer that you’ve applied gives you extra adhesion to your paint and supports it. So, hopefully you won’t need another layer of paint.
So, there you have all the information that you needed to know about the painting over Venetian plaster.
We’ve also shown you how you can take care of the painting on your own. You’re now more than able to paint over the Venetian plaster yourself.
So, let’s try something new on your wall, shall we?