How to Get House Paint Off a Car Using a Clay Bar

Can you imagine the scary moment when house paint comes in contact with a car? It can fly off to your car on a windy day or simply because the car was close to your house painting chaos. And taking that off isn’t an easy nut to crack.

That said, you’re in deep search of a process on how to get house paint off a car, right?

Well, pat your back. You’ve landed on just the right page on the web, where we’ll be taking you through a step-by-step guideline on it. Period.

Things You’ll Need

You might be quite enthusiastic to figure out how to get the annoying paint off your car. Well, we do get that.

However, before we start the journey why don’t we take a look at the items you’ll need for this process?

LIST OF ITEMS:

Yep, that’s all you need. Do you have them? Great, we can start then!

How to Get House Paint Off a Car in 6 Steps?

While painting you might have dragged some paint to your car. This can happen even if you carefully drag the paint gun in your collection. But no need to fear. All you have to do is rub the clay bar for half an hour.

So, warm up your hands. That’s because we’re about to start a rigorous journey to remove paint from your car.

Step 1- Clean your car

First things first, you need to clean your car. Although it might not be super dirty you should still shine up your car. This way, the clay bar won’t mix up with the dirt.

If it does, you won’t be able to preserve the clay bar again. Afterward, you’ll have to toss it into a dustbin. Won’t that be super sad?

Anyway, back to the main topic, you have to clean your car. But how do you do that? You should sprinkle some water over using a water hose. Then dry it up with a towel.

Yeah, that’s all there is to it. Once the car is all dried up you can move on to the next course of action.

Step 2- Apply a clay lubricant

In this step, you have to work with some clay lubricant. But why do you need a clay lubricant to begin with? Well, in a few minutes you’ll have to scrub your car with a clay bar.

While this is made of clay and everything but it’s still hard to some extent. Hence, you need to tone it down a bit. In order to create a buffer, you have to use clay lubricant.

No products found.

This will in fact make your car extra smooth. Afterward, you won’t have to worry about a scratch on it. Thus, don’t forget to carry out this useful step before working with the clay bar.

Step 3- Rub clay bar on the paint

Alright, the car is lubricated and ready for your clay bar. So, take out the magical bar and start rubbing on the parts covered with paint.

But before that make sure you cover your hand with gloves. This precaution is necessary to keep your hands safe. Now, don’t be scared of the clay bar.

They aren’t that harmful though. But at end of the day, it’s still a chemical and it’s best to take safety measures. Plus, your hands stay clean. So, it is a win-win!

No products found.

Anyway, the main point is that you have to rub the clay bar around the tainted parts.

Make sure you only rub in one direction. This way your car won’t get scratched.

Step 4- Wipe the car and reapply the clay bar

Hold on, you’re still not done with the clay bar. Remember what we said? It is quite a lengthy process. Hence, don’t put down the bar just yet.

Instead, grab a towel and bring some water. This time, you have to wipe the clay bar using a towel. But before that rinse it out a bit with the water from your water hose.

Then reapply the clay bar. Yes, don’t give up yet. Instead, you have to continue these 5 to 6 times to wipe off the paint completely. And yes, this will take a long time.

Half an hour to be exact but there’s nothing to do. You simply have to push through. However, think about the results. Your car won’t have any unwanted paint on it.

Doesn’t that make it all worth it?

Step 5- Spray the clay lubricant once again

By now, the paint might be gone but quite a few residues will be left. This comes from the clay bar. And sometimes the towel wipes aren’t enough.

No matter how hard you try to wipe them it’ll still be there. So, how do you deal with these annoying residues?

Well, you can spray clay lubricant over the car. This will remove all the leftover clay particles from the clay bar.

Later on, wipe the area with a towel to clean up the entire mess. After this, your car will be back to being glossy and dashing as before.

Step 6- Store the clay bar in a secured place

Lastly, finish up your work by storing the excess clay bar in a safe place. You see, to remove the paint you won’t be using the entire bar.

But that doesn’t mean you’ll have to throw it away. Instead, store it up in a plastic case. You’ll be able to use it later.

Might come in handy if you ever spill paint on your car again.

Extra Tips for Claying a Car

We appreciate that you’re taking an all-DIY approach to take the paint off your car using clay. Maybe, you’re intending not to spend on painting jobs that cost serious bucks.

That said, to make sure you get the work right, here are some bonus tips that you can note-

Cut the clay bar into small pieces

Before applying the clay bar, you can chop it into tiny pieces. This way even if you drop the bar you won’t have to throw away the entire bar.

You can simply grab a piece of the remaining clay bar and use them.

Always use the fresh side

While rubbing the clay you might see that the clay tends to dry out because of the paint. Hence, it is necessary to flip it every now and then.

And if both sides get dried up you can always switch to another piece of clay. But don’t rub the dried-out part on your car. It’ll only make things worse.

This ensures that most of the paint gets removed.

To Sum Up

Isn’t it easy to get rid of paint? Now, if anyone asks how to get house paint off a car, you’ll be able to help them out too.

But before that why don’t you try it out yourself. Once you’re done, don’t forget to let us know about your experience. We’ll love to read your comments and help you out.

Anyway, that’s all for now. Take care. Adios!